USB connection

Use your PC to access additional power protection and management features for your UPS via a USB Port.

Telephone dataline surge protection

Provides protection of connected equipment from power surges traveling on telephone lines.

Automatic Voltage Regulation (AVR)

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Learn More

PC Power ST-650VA 650VA Offline UPS with Metal Body Interactive UPS with AVR incorporated, 600VA, 360W, with 2 Shuko sockets, 15-25 minutes of autonomy. Cold start. Audible alarm. Large input voltage line. Intelligent battery management. Automatic charging when OFF mode. Surge continuous suppression and noise filter. Short-circuition protection and low voltage battery. Features: BrandPC: Power ModelPC: Power ST-650VA TypeOffline: UPS Input Voltage:V)100-270V Output Voltage: (V)220V 5% Frequency: (Hz - KHz)50/60Hz Load Capacity: 360WBattery.1 PC with 12V & 7Ah Back up time(Full load)10-15 Minutes (1PC & 1 Monitor) Body MaterialMetal SpecialtyPC power offline UPS has automatic voltage regulation, wide UPS input voltage range, high / low voltage protection, overload and short circuit protection, automatic recharge, intelligent battery management system, compatibility with generators, phone line and peripheral equipment protection Warranty1 year Learn More

Output power capacity 375Watts / 650VA Nominal Output Voltage 230V Nominal Input Voltage 230V Input Connections British BS1363A Cord Length 1.5meters APC EASY UPS BV 650VA, AVR, Universal Outlet, 230V Easy UPS provides power protection for unstable power conditions, ensuring consistent and reliable connectivity at the most critical moments. Includes: User Manual Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations and mounting on wall or other surfaces. Easy UPS Features & Benefits Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Protection Battery and surge-protected outlets Back up and protect your hardware and data during power outages, surges, and spikes. Battery backup and surge protection Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. Availability Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps, and battery damage due to low voltage situations. Manageability Audible alarms Provides notification of changing utility power and UPS power conditions LED Indicators Provide easy-to-read status of the unit and utility power conditions. Features Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor. Cold-start capable Provides temporary battery power when the utility power is out. Learn More

 

SKU CODE	BV800I-MSX
Brand	APC
Output	Max Configurable Power (Watts): 450 Watts / 800VA, Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Unsynchronised, Topology: Line interactive, Waveform type: Stepped approximation to a sinewave, Transfer Time: 6 ms typical : 10 ms maximum
Input	Input frequency: 50/60 Hz +/- 5 Hz Auto-sensing, Input voltage range for main operations: 170 - 280V, Number of Power Cords: 1
Batteries & Runtime	Battery type: Lead-acid battery, Expected Battery Life (years): 3 - 5
Communications & Management	Control panel: LED Status display with on line : on battery, Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm.
Dimension HxWxD	9.25 x 16.5 x 30.5 cm
Weight	5.3Kg
Warranty	2 years

Learn More

Protect your data and hardware from electrical power outages and current fluctuations. Using APC SMT750IC UPS devices, available for towers and racks, you can ensure that power supply is secured. APC is the reference market leader in Europe concerning uninterrupted For every customer preference we find the appropriate solution. APC Back UPS Units are available as Tower Version. APC Smart UPS Units are been offered as Tower-or Rack Version. The Smart-UPS series is been offered in different functional principles: Smart UPS Units with Online double-conversion and as Line-Interactive Units.

Manufacturer:	APC©
Manufacturer number:	SMT750IC
Product group:	APC Smart UPS
Series:	APC UPS
Type:	Tower
Replacement battery:	RBC48
Technology:	Line-Interactive
Output Connections:	6 x Plug IEC-320 C13
Input Connections:	1 x Plug IEC-320 C14
Max Power:	500 W
Max apparent power:	750 VA
Nominal voltage:	230 V
Interface Ports:	SmartSlot, USB, Serial, SmartConnect
Network compatible:	Possible
Runtime (50%):	15,9 Min.
Runtime (Full load):	4,6 Min.
Extend runtime:	Not possible
Runtime Graph:	Chart
Manufacturer’s warranty:	3 years repair or replace (excluding battery) and 2 year for battery (Details see on the website of producer)
Length:	363 mm
Width:	138 mm
Height:	161 mm

Learn More

Protect your data and hardware from electrical power outages and current fluctuations. Using APC SMT1000IC UPS devices, available for towers and racks, you can ensure that power supply is secured. APC is the reference market leader in Europe concerning uninterrupted For every customer preference we find the appropriate solution. APC Back UPS Units are available as Tower Version. APC Smart UPS Units are been offered as Tower-or Rack Version. The Smart-UPS series is been offered in different functional principles: Smart UPS Units with Online double-conversion and as Line-Interactive Units.

Manufacturer:	APC©
Manufacturer number:	SMT1000IC
Product group:	APC Smart UPS
Series:	APC UPS
Type:	Tower
Replacement battery:	RBC6
Technology:	Line-Interactive
Output Connections:	8 x Plug IEC-320 C13
Input Connections:	1 x Plug IEC-320 C14
Max Power:	700 W
Max apparent power:	1000 VA
Nominal voltage:	230 V
Interface Ports:	SmartSlot, USB, Serial, SmartConnect
Network compatible:	Possible
Runtime (50%):	19,1 Min.
Runtime (Full load):	5,8 Min.
Extend runtime:	Not possible
Runtime Graph:	Chart
Manufacturer’s warranty:	3 years repair or replace (excluding battery) and 2 year for battery (Details see on the website of producer)
Length:	439 mm
Width:	171 mm
Height:	219 mm

Learn More

Protect your data and hardware from electrical power outages and current fluctuations. Using APC SMC1000I-2UC UPS devices, available for towers and racks, you can ensure that power supply is secured. APC is the reference market leader in Europe concerning uninterrupted For every customer preference we find the appropriate solution. APC Back UPS Units are available as Tower Version. APC Smart UPS Units are been offered as Tower-or Rack Version. The Smart-UPS series is been offered in different functional principles: Smart UPS Units with Online double-conversion and as Line-Interactive Units.

Manufacturer:	APC©
Manufacturer number:	SMC1000I-2UC
Product group:	APC Smart UPS
Series:	APC UPS
Type:	Rack
Replacement battery:	RBC124
Technology:	Line-Interactive
Output Connections:	4 x Plug IEC-320 C13
Input Connections:	1 x Plug IEC-320 C14
Max Power:	600 W
Max apparent power:	1000 VA
Nominal voltage:	230 V
Interface Ports:	USB, Serial, SmartConnect
Network compatible:	Not possible
Runtime (50%):	16,3 Min.
Runtime (Full load):	6 Min.
Extend runtime:	Not possible
Runtime Graph:	Chart
Manufacturer’s warranty:	2 years repair or replace (Details see on the website of producer)
Length:	406 mm
Width:	432 mm
Height:	89 mm
Rack units:	2 U

Learn More

Protect your data and hardware from electrical power outages and current fluctuations. Using APC SMX1000I UPS devices, available for towers and racks, you can ensure that power supply is secured. APC is the reference market leader in Europe concerning uninterrupted For every customer preference we find the appropriate solution. APC Back UPS Units are available as Tower Version. APC Smart UPS Units are been offered as Tower-or Rack Version. The Smart-UPS series is been offered in different functional principles: Smart UPS Units with Online double-conversion and as Line-Interactive Units.

Manufacturer:	APC©
Manufacturer number:	SMX1000I
Product group:	APC Smart UPS
Series:	APC UPS
Type:	Rack/Tower
Replacement battery:	RBC116
Technology:	Line-Interactive
Output Connections:	8 x Plug IEC-320 C13
Input Connections:	1 x Plug IEC-320 C14
Extended run options:	External Battery Pack (see Accessories) for extended runtime: SMX48RMBP2U
Max Power:	800 W
Max apparent power:	1000 VA
Nominal voltage:	230 V
Interface Ports:	SmartSlot, USB, Serial
Network compatible:	Possible
Runtime (50%):	24,2 Min.
Runtime (Full load):	8,1 Min.
Extend runtime:	Possible
Runtime Graph:	Chart
Manufacturer’s warranty:	3 years repair or replace (excluding battery) and 2 year for battery (Details see on the website of producer)
Length:	490 mm
Width:	432 mm
Height:	89 mm
Rack units:	2 U

Learn More

Protect your data and hardware from electrical power outages and current fluctuations. Using APC SMT1000RMI2UC UPS devices, available for towers and racks, you can ensure that power supply is secured. APC is the reference market leader in Europe concerning uninterrupted For every customer preference we find the appropriate solution. APC Back UPS Units are available as Tower Version. APC Smart UPS Units are been offered as Tower-or Rack Version. The Smart-UPS series is been offered in different functional principles: Smart UPS Units with Online double-conversion and as Line-Interactive Units.

Manufacturer:	APC©
Manufacturer number:	SMT1000RMI2U
Product group:	APC Smart UPS
Series:	APC UPS
Type:	Rack
Replacement battery:	RBC157
Technology:	Line-Interactive
Output Connections:	4 x Plug IEC-320 C13
Input Connections:	1 x Plug IEC-320 C14
Max Power:	700 W
Max apparent power:	1000 VA
Nominal voltage:	230 V
Interface Ports:	SmartSlot, USB, Serial, SmartConnect
Network compatible:	Possible
Runtime (50%):	31,3 Min.
Runtime (Full load):	8,7 Min.
Extend runtime:	Not possible
Runtime Graph:	Chart
Manufacturer’s warranty:	3 years repair or replace (excluding battery) and 2 year for battery (Details see on the website of producer)
Length:	457 mm
Width:	432 mm
Height:	89 mm
Rack units:	2 U

Learn More

Protect your data and hardware from electrical power outages and current fluctuations. Using APC SMC1500IC UPS devices, available for towers and racks, you can ensure that power supply is secured. APC is the reference market leader in Europe concerning uninterrupted For every customer preference we find the appropriate solution. APC Back UPS Units are available as Tower Version. APC Smart UPS Units are been offered as Tower-or Rack Version. The Smart-UPS series is been offered in different functional principles: Smart UPS Units with Online double-conversion and as Line-Interactive Units.

Manufacturer:	APC©
Manufacturer number:	SMC1500IC
Product group:	APC Smart UPS
Series:	APC UPS
Type:	Tower
Replacement battery:	RBC6
Technology:	Line-Interactive
Output Connections:	8 x Plug IEC-320 C13
Input Connections:	1 x Plug IEC-320 C14
Max Power:	900 W
Max apparent power:	1500 VA
Nominal voltage:	230 V
Interface Ports:	USB, Serial, SmartConnect
Network compatible:	Not possible
Runtime (50%):	20,4 Min.
Runtime (Full load):	7,8 Min.
Extend runtime:	Not possible
Runtime Graph:	Chart
Manufacturer’s warranty:	2 years repair or replace (Details see on the website of producer)
Length:	439 mm
Width:	171 mm
Height:	219 mm

Learn More