Cisco Switch Catalyst 2960|WS-C2960XR-48TD-I|texpertsystems UAE

Cisco Catalyst 2960XR-48TD-I Switch 48 Ports Managed Desktop

Rating:
0%
SKU
WS-C2960XR-48TD-I
In stock
AED8,603.81

Cisco Catalyst 2960-X series switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS Software features.

Device Type Switch - 48 ports - L3 - Managed - stackable
Enclosure Type Desktop, rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 + 2 x SFP+
Performance Switching capacity: 216 Gbps
Forwarding performance: 130.9 Mpps
Capacity Virtual interfaces (VLANs): 1023
Jumbo Frame Support 9216 bytes
Max Units In A Stack 8
Routing Protocol OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI
Authentication Method Secure Shell (SSH), RADIUS, TACACS+
Features Layer 2 switching, auto-negotiation, ARP support, Cisco Fast EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az
Processor 1 x ARM: 600 MHz
RAM 512 MB
Flash Memory 128 MB
Status Indicators Port status, link activity, port transmission speed, port duplex mode, system
DIMENSIONS & WEIGHT
Width 44.5 cm
Depth 40.8 cm
Height 4.45 cm
Weight 6.1 kg
MISCELLANEOUS
MTBF 440,880 hours
Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, CB, ICES-003 Class A, RoHS, EN300-386, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, FCC Part 15 A, CSA C22.2 No. 60950-1, VCCI Class A, KN22, KN24
POWER
Power Device Internal power supply - hot-plug
Installed Qty 1 (installed) / 2 (max)
Power Redundancy Yes
Power Redundancy Scheme 1+1
Power Provided 250 Watt
Voltage Required AC 120/230 V (50/60 Hz)
ENVIRONMENTAL PARAMETERS
Min Operating Temperature -5 °C
Max Operating Temperature 45 °C
Humidity Range Operating 10 - 95% (non-condensing)
Min Storage Temperature -25 °C
Max Storage Temperature 70 °C
Humidity Range Storage 10 - 95% (non-condensing)
EXPANSION / CONNECTIVITY
Interfaces 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45
2 x SFP+
1 x USB - Type A
1 x USB - Type B
1 x console - RJ-45
1 x management (LAN) - RJ-45
MANUFACTURER WARRANTY
Service & Support Limited warranty - lifetime
SOFTWARE / SYSTEM REQUIREMENTS
Software Included Cisco IOS IP Lite
Write Your Own Review
You're reviewing:Cisco Catalyst 2960XR-48TD-I Switch 48 Ports Managed Desktop